Worried about the maintenance of your Aqua guard Protec Plus? Maintenance of the RO + UV AquaSure Water Purifier and Protec Plus is similar. Dial the Eureka Forbes customer care number; you will be guided accordingly. One of the few steps that you can follow is getting the particulate filter cleaned regularly. To start with, the tap water valve should be closed and the tap of the filter should be held, pushed downward, and separated from the pipe. The next step is back-flushing
How do you back-flush the particulate filter of your Aqua guard or AquaSure water purifier? The tubes from the outlet and inlet sides of the filter should be disconnected. The next step is getting the outlet connector of the filter bowl connected to the tube from the tap water valve. Ensure that the other connector of the filter is left open. The back-flushing process will start now. All you need to do is turn the tap on to maximum pressure and let it flow continuously for 10 minutes. The water should flow into the sink. Now get the respective tubes reconnected to the outlet and inlet connectors as before. Ensure that the tubes are not interchanged.
How do you back-flush the particulate filter of your Aqua guard or AquaSure water purifier? The tubes from the outlet and inlet sides of the filter should be disconnected. The next step is getting the outlet connector of the filter bowl connected to the tube from the tap water valve. Ensure that the other connector of the filter is left open. The back-flushing process will start now. All you need to do is turn the tap on to maximum pressure and let it flow continuously for 10 minutes. The water should flow into the sink. Now get the respective tubes reconnected to the outlet and inlet connectors as before. Ensure that the tubes are not interchanged.
